雪鹰领主,完美世界官网,好看的课外书

商品名稱：DG型多級離心泵
添加時間：2022-12-08 16:38:20
電話：15955043377
郵箱：[email protected]

介紹：

產品概述：Product overview:

DG型多級離心泵具有效率高、性能范圍廣、運行安全平穩、噪音低、壽命長、安裝維修方便等特點。供輸送清水或物理化學性質類似于水的其它液體。也可以通過改變泵過流部件材質、密封形式和增加冷卻系統用于輸送熱水、油類、腐蝕性或含磨粒的介質。

本型泵是單殼體節段式多級離心泵。其吸入口和吐出口均垂直向上。前段、中段和后段用穿杠聯接成一體，各段之間靜止結合面主要靠金屬面密封外，并沒有O型膠圈作為輔助密封。DG型高壓泵的吸入段、中段、吐出段采用鍛件。

DG multistage centrifugal pump is characterized by high efficiency, wide performance range, safe and stable operation, low noise, long service life, convenient installation and maintenance, etc. It is used to transport clear water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material and sealing form of the flow passage parts of the pump and adding a cooling system.

This type of pump is a single shell segmental multi-stage centrifugal pump. The suction inlet and discharge outlet are vertically upward. The front section, the middle section and the rear section are connected as a whole by a threaded rod. The static joint surface between the sections is mainly sealed by the metal surface, and there is no O-ring as the auxiliary seal. Forgings are used for suction section, middle section and discharge section of DG type high-pressure pump.

性能參數表：Performance parameter table:

型號（Type）	流量		揚程	轉速	效率	必需氣蝕余量	（KW）
型號（Type）	m3/h	L/S	（m）	（R.P.M）	（%）	（r）	軸功率	電機功率
DG6-25×3	6.3	1.75	75	2950	45	2.0	2.86	5.5
DG6-25×4			100				3.81	7.5
DG6-25×5			125				4.77	7.5
DG6-25×6			150				5.72	11
DG6-25×7			175				6.67	11
DG6-25×8			200				7.63	15
DG6-25×9			225				8.58	15
DG6-25×10			250				8.53	18.5
DG6-25×11			275				10.5	18.5
DG6-25×12			300				11.44	18.5
DG12-25×3	12.5	3.47	75	2950	54	2.0	4.73	7.5
DG12-25×4			100				6.30	11
DG12-25×5			125				7.88	11
DG12-25×6			150				9.46	15
DG12-25×7			175				11.04	15
DG12-25×8			200				12.61	18.5
DG12-25×9			225				14.18	18.5
DG12-25×10			250				15.76	22
DG12-25×11			275				17.34	22
DG12-25×12			300				18.9	30
DG12-30×3	25	6.94	90	2950	62	2.2	9.88	15
DG12-30×4			120				13.1	18.5
DG12-30×5			150				16.47	22
DG12-30×6			180				19.77	30
DG12-30×7			210				23.1	30
DG12-30×8			240				26.4	37
DG12-30×9			270				29.65	37
DG12-30×10			300				32.9	45
DG46-30×3	43	11.9	90	2950	70	3.0	16.11	22
DG46-30×4			120				21.48	30
DG46-30×5			150				26.85	37
DG46-30×6			180				32.21	37
DG46-30×7			210				37.58	45
DG46-30×8			240				42.95	55
DG46-30×9			270				48.32	55
DG46-30×10			300				53.69	75
DG46-50×3	46	12.8	150	2950	63	2.8	29.83	37
DG46-50×4			200				39.77	45
DG46-50×5			250				49.71	55
DG46-50×6			300				59.65	75
DG46-50×7			350				69.6	75
DG46-50×8			400				79.54	90
DG46-50×9			450				89.48	110
DG46-50×10			500				99.42	110
DG46-50×11			550				109.36	132
DG46-50×12			600				119.3	132
DG85-45×2	85	23.6	90	2950	72	4.2	28.94	37
DG85-45×3			135				43.4	55
DG85-45×4			180				57.87	75
DG85-45×5			225				72.34	90
DG85-45×6			270				86.81	110
DG85-45×7			315				101.3	132
DG85-45×8			360				115.7	132
DG85-45×9			405				130.2	160
DG155-30×2	155	43	60	1480	75	3.9	33.77	55
DG155-30×3			90				50.65	75
DG155-30×4			120				67.54	90
DG155-30×5			150				84.42	110
DG155-30×6			180				101.3	132
DG155-30×7			210				118.2	160
DG155-30×8			240				135.1	180
DG155-30×9			270				152	180
DG155-30×10			300				168.8	225
DG155-67×3	155	43	201	2950	74	5.0	114.7	132
DG155-67×4			268				152.9	185
DG155-67×5			335				191.1	220
DG155-67×6			402				229.3	275
DG155-67×7			469				267.5	350
DG155-67×8			536				305.7	350
DG155-67×9			608				344	440
DG280-43×2	280	77.8	86	1480	77	4.7	85.17	110
DG280-43×3			129				127.7	150
DG280-43×4			172				170.3	230
DG280-43×5			215				212.9	300
DG280-43×6			258				255.5	300
DG280-43×7			301				298.1	350
DG280-43×8			344				304.7	410
DG280-43×9			387				383.2	430

上一篇：IHA型離心泵

下一篇：SH型單級雙吸離心泵

產品展示

化工離心泵